market@doinggroup.com Tel: +86 150 3713 8562

Home>News>Industry news >How to improve the purity of the separated copper and plastic?

How to improve the purity of the separated copper and plastic?

In the waste copper wire recycling business, the higher purity of the separated copper and plastic you can get, the more profit you can earn from this business. So there are more and more people concerned about how to improve the purity of the separated copper and plastic. Actually, according to different kinds of copper wires, there will be different machine configurations equipped to properly process thus to get a high purity. In the following we'll have a general introduction of this part.

copper wire granulator machine Small type copper wire granulator machine

First about the copper wire granulator machine, normally it can process almost all kinds of waste copper wires to separate the copper and plastic for profit. The main process of this machine is crushing and air separation, then the copper and plastic will be directly separated. But there are many different types of the copper wires in life, so sometimes just with one normal configuration to process, it will not achieve a high purity of the separated copper and plastic. Under this condition, will need to equip other optional machines to improve its effect.

copper wire granulator machine 3D picture of large copper wire granulator machine

For example, if in your raw materials, there are also many thin copper wires, then if only with copper wire granulator machine to crush and separate it, there will be about 2% thin copper left in the plastic and cannot separate. If you want to improve the purity of the separated copper and plastic, then it's better to equip an electrostatic separator to further recycle the thin copper out. After this, the machine separation rate can be reaching almost 99.9%, the final product will be very pure.

copper wire granulator machine The separated copper is very pure

In life it's normal to see people processing car wires or other scrap wires too. As we know, there is iron usually contained in this kind of raw materials. So for processing these waste, we'll suggest customers to equip a magnetic separator to remove the iron first, so that it will not mix into the final product separated, and improve the purity of the separated copper and plastic finally.

There are many other types of the waste copper wires in life too. We will provide you with the most proper solutions according to your materials to get a high purity of the separated copper and plastic. So if you have interest to know more, please feel free to contact us DOING company.

 

Leave Message

If you want to get more details about How to improve the purity of the separated copper and plastic?, you can send E-mail to market@doinggroup.com. Or you can consult our professional engineers and specialized sales team by leaving a message in below form. We will contact you ASAP.

Name

E-mail*

Country

Tel/Whatsapp

Inquiry

  • Chat online
  • WhatsApp
    +86 150 3713 8562
  • Message
  • Wechat