What's the process of radiator recycling machine?

Radiator recycling machine is used for processing and recycling radiators to get aluminum, copper and iron. The process of DOING radiator recycling machine is wholly automatic and very easy to operate.

Radiator recycling machine

This is the 3D working flow animation of Doing radiator recycling machine. Watching it, you can learn about the details about the process of radiator recycling machine.

As this above video shows, the process of radiator recycling machine mainly includes shredding, crushing, and separating. The detailed working process is as the follow description shows.

First is shredding, the shredder processes the used radiator into 3-5cm pieces.

Second, Crushing of waste radiators up to 4 mm with a crusher.

Third, the light aluminium is separated from the metal using a negative-pressure baffling separator. The iron is then separated from the copper and aluminium by a magnetic separator.

Finally, use air separator to separate aluminum and copper. The separation rate can be reach more than 99%.

Because the process of DOING Company radiator recycling machine is fully automated and easy to operate, the labour cost required is very low. Usually, only one worker is needed to place the waste radiator on a belt conveyor and after a series of processing, copper and aluminum will be conveyed out from different outlets.

In addition, DOING radiator recycling machine is also equipped with a pulse dust collector with air compressor, which collects very thin dust even below 0.4Nano. And the most important point is that this pulse dust collector with its own air compressor does not require cleaning. If there is a lot of dust in the bag, it can be cleaned automatically with just one press.

Pulse dust collector

There is also a kind of machine called stripping type radiator separator machine in DOING, which is used for peeling copper tubes from aluminum foil. Stripping type radiator separator machine is small type single machine and also easy to operate.

Stripping type radiator separator machine

If you are interested in the radiator recycling machine or want to know more about the stripping type radiator separator machine, you can contact with DOING Company. We have professional engineer team and sales managers can give you suitable suggestions.