Why is radiator copper tube separator equipment more and more popular?

As the radiator copper tube separator equipment is low cost and easy operation, and can separate copper tube and aluminum from waste radiators quickly and directly, so it’s very welcomed among people recent years.

Before, some people may recycle and separate the radiators by labor, but that’s very low efficiency and hard to process, too. Especially in some European countries, the labor cost is also expensive. So more and more people start to look for better ways to recycle the waste radiators.

Actually, there are two types of machine which can be used to recycling waste radiator. One is the radiator copper tube separator equipment - small scale radiator recycling machine, and the other is radiator crusher and separator equipment - large scale radiator recycling machine. Each of these two machines has its own advantages.

Small scale radiator copper tube separator equipment:

Small scale radiator copper tube separator equipment

Advantages: low cost, quickly separating, small footprint, low energy consumption

Small scale radiator copper tube separator equipment is used to small daily processing capacity recycling business, suitable for processing flat waste radiator, which has been not deformable.

Working process:

1. Use the radiator cutter to cut off the iron side first

2. Cut the radiators into proper thickness and width, the pre-process will be ok.

3. Put the radiators on the radiator copper tube separator equipment directly, and it will separate copper tube and aluminum automatically.

Large scale radiator crusher and separator equipment:

Large scale radiator crusher and separator equipment

Advantages: large processing capacity, high production rate, high separation rate, economize on manpower

Large scale radiator crusher and separator equipment can process all kinds of waste radiators, such as air conditioner, car water tanks, industrial cold storage, etc. It uses physical separation method, with high separation rate and no pollution, which is the best choice for large scale recycling company.

Working process:

1. Put radiators into shredder, to shred them into small pieces.

2. Use hammer crusher to crush small pieces into small particle in 2-3cm.

3. Use negative-pressure baffling separator to separate most aluminum first.

4. Use air separator to separate copper and rest aluminum.

5. During process, collect dust by pulse dust collector.

Now, with all this said, you should know why radiator copper tube separator equipment is more and more popular. If you are new starter for recycling business of radiator, maybe you also should to buy a set of radiator copper tube separator equipment to start business quickly.