Operation and maintenance measures of copper wire recycling machine

The copper wire recycling machine of Doing adopts PLC control system, which is high automatic and easy to operate. You just need to put the waste copper wire in the conveyor belt, then the waste copper wire would enter the shredder and crusher automatically. In addition, the copper wire recycling machine could process sizes range for 0-80mm copper wires. Henan Doing reminds that right operation could improve the work efficiency.

Copper wire recycling machine

Besides, any equipment has a life. If you want to use it for a long time, it is necessary to carry out daily maintenance, daily cleaning of parts is also essential. When we use the copper wire recycling machine, we should pay attention to the two parts that are most likely to be blocked and need to be cleaned regularly.

1.Screen cloth

Screen cloth of copper wire recycling machine

Screen cloth is used for filtering copper particles, making sure the separated of copper and plastic more pure. It is a very important part which is easy to be blocked in production. It needs to be cleaned every half month, which is conducive to the use effect of copper wire recycling machine.

2.Knives

Knives of copper wire recycling machine

After using for a period of time, it will become dull, which will affect the separation effect, so every once in a while you need to grind once. The tool will become narrow after repeated grinding. When the gap between the rotating blade and the shell fixed blade can not crush the waste wire, you need to replace the old tool. When grinding or replacing the tool, the power should be turned off before operation. After grinding or replacing the tool, the gap between the moving tool and the fixed tool should be adjusted.

Operation and maintenance measures of copper wire recycling machine should be guided by skillful and rich experienced engineers. Henan Doing have rich experienced engineers could provide reasonable suggestion, if you have needs or information to consult.