How does copper wire recycling machine work?

Copper wire recycling machine is mainly used to recycle copper and plastics of scrap cable wires, which is an environmental protection type machinery. It adopts totally dry and physical separation method, without using fire ,water or chemical, thus no secondary pollution to the environment. So, how does copper wire recovery machine work?

Copper wire recycling machine

The working process of copper wire recycling machine follow as:

1. Feeding

Feed the waste cable wire into the machine.

2. Crushing

Crush waste cable wires to small particles, by a crusher. During crushing period, the crushing speed should be in accordance with the feeding speed.

Working process of copper wire recycling machine

3. Air separation

Separate copper out of plastic by air separator first, according to the different gravity of copper and plastic.

4. Dust removal

During the whole working, pulse dust removal and cyclone dust removal system will collect the dust, which won't pollute the air.

Components of copper wire recycling machine

The standard working process of copper wire recycling machine is over. This process can process those wires, whose diameter size is 35mm. But if the raw material is fine wires, like 3 mm, or contents some iron, the separating rate of standard configuration copper wire recycling machine can only reach to 97%-98%. So, if you want to get higher separating rate, you need to add some stand-alone equipment, like shredder, magnetic separator, electrostatic separator, etc. The working process will be shredding, iron removal, crushing, air separation, electrostatic separation and dust collect.

In a word, the working process of copper wire recycling machine depends on the raw material type and per day processing capacity. If you want to know the working process of copper wire recycling machine, welcome to contact us. Our sales manager will give you the specific program and quotation.